(1) The gunsmith would take a hacksaw and slice the front end off an old military slide, cut part of the front end off the customer's slide, square both pieces in the mill and then join the two with a good gas weld.(2) That means cutting in from the opposite side to meet your cut rather than going all the way through in one direction, which can delaminate the outer carbon layer where the hacksaw comes through.(3) If some of it is sticking up you can hacksaw a slot into it and turn it with a screwdriver(4) To remove a screw with a damaged slot another slot can be cut with a hacksaw blade if the head is exposed enough.(5) If there is enough sticking out to unscrew it with a pair of pliers or to hacksaw a slot in it and unscrew it with a screwdriver, then do that.(6) Heck, I've even had mates hacksaw the locks off their bikes without anyone calling them on it.(7) You may need a hacksaw to get these off if they are corroded.(8) Better yet, why not take a hacksaw and rip it down?(9) A hacksaw or metal cutting bandsaw is the tool to use here.(10) For this you will need a hacksaw or a jigsaw with a hacksaw blade.(11) They gently attached the metal plughole to a vice before cutting Becky free with a hacksaw blade.(12) Failing that, use a hacksaw or hammer and cold chisel to cut through it.(13) First, she removes the fabric covering from the frame and cuts off the curved handle with a hacksaw .(14) It should include five essential items, a hammer and screwdriver, crucial for many fixes, a knife for delicate cutting, a hacksaw for bigger cuts, and a roll of measuring tape to ensure your fixes are precise.(15) I would never use this process on a super lightweight frame but found it preferable to trying to use the bare hacksaw blade method.(16) Slide the vinyl seal out of the carrier before you cut the carrier with a fine-tooth hacksaw blade.
